November 28, 2022

How to apply Pentens Fleseal T-200 UV Resistant Elastomeric Waterproofing Coating | Do It Yourself





Do you know what is the main reason waterproofing system failed? In fact, wrong application!
Watch this video for a step by step guide on “How to apply waterproofing system using Pentens Fleseal T-200 Elastomeric Waterproofing Coating?”

PENTENS FLESEAL T-200 is based on newly developed Acrylic Polymers and it dramatically reduces solar heat absorption in either air-conditioned or non-air conditioned buildings. It takes the majority of the heat load off a building’s skin and reduces temperatures to approximately that of outside shade. Can use to RC gutters and planter boxes, floor slabs, deck, wood siding/fences, external, wall, flat roof, metal roof, concrete structures. It also can apply to seal cracks and joint on wall, ceilings and roofing.
Shop online now at https://bit.ly/3mH77f8

Pentens Fleseal T-200 UV Resistant Elastomeric Waterproofing Coating
• Formula based on newly developed acrylic polymers.
• UV Resistant, which dramatically reduces solar heat absorption and temperature.
• Elastomeric, refers to the rubber-like properties of a polymer.
• Forms an incredibly thick yet flexible coating that helps waterproof the exterior of a structure.
• Able to bridge hairline cracks to complete an airtight waterproof seal.

Advantages
• Low Volatile Organic Compound (VOC).
• Water based and non-formaldehyde.
• No blistering, cracking and peeling.
• Chemical resistance & user friendly.
• Tough and durable to weather, bacteria and fungus.
• Adheres well over galvanized and metal roofs, wood, asphalt or aluminum coatings, polystyrene foam insulation, polyester plastic panels, precast flat concrete and barrel cement tiles and many roofing materials.

Areas of Application
• RC gutter
• RC planter boxes
• Floor slabs
• External decks, landscaped area
• External wall
• Wood siding/ fences
• RC flat roof
• Metal/ steel roof
• New/ old masonry and concrete
• Terraces, balconies and service yards

PENTENS T-007 is a 100% acrylic cement modifier based on a proven 100% acrylic polymer designed to improve the chemical, corrosion, moisture, and salt resistance of cement renders. It is superior compared to most PVA and SBR-based modifiers because of its superior durability and resistance to hydrolysis. It has been specially formulated for use in high alkaline cement environments. Cement mortars based on PENTENS T-007 will adhere to a wide range of materials such as metals, timber, insulation foams as well as new and old concrete.
Shop online now at https://bit.ly/33yTUiu

PENTENS T-100 is a single component, a newly developed polymer of MMA, natural rubber, and polyurethane combined with asphalt and then modified and further emulsified to form an elastic waterproof membrane. PENTENS T-100 is an environmentally friendly and low VOC material.
Shop online now at https://bit.ly/3rigOnL

PENTENS T-100 Pro is a single component water-based bitumen PU emulsion containing fine aggregate, filler, and fiber. PENTENS T-100 Pro is specially formulated to produce a tough, flexible, trafficable, and durable bituminous film when dry.
Shop online now at https://bit.ly/3kfkao0

#atkc #homeimprovement #pentens
For more information, please visit www.ewarehouse.my – Malaysia’s Largest Home Improvement Online Store.

source

Leave a Reply

Your email address will not be published. Required fields are marked *