September 21, 2023

HOW TO REGLAZE A BATHTUB #6 | Spraying DIY Primer on a Bathtub before REGLAZING

Here is a simple easy DIY Bathtub Primer to use before Bathtub Reglazing. Make sure to clean and prepare the surface with light sanding with 220 grit sand paper prior to spraying. Also make sure you give it at least 1-2 hours curing time before applying top coat. Zinsser Bulls Eye Primer 1-2-3 has worked for me on hundreds of bathtub reglazing jobs. I highly recommend it especially for DIY projects.


Products Used in Videos on this Channel:
Material Used:
Bondo Fiberglass Resin:
Bondo Fiberglass Mat:
Bondo Glass Short Strand:
Ryobi Corded Drill:
HDX Mixing Cup 32oz:
2″ Paint Brush 24pk:
120 To 3000 Assorted Grit Sandpaper for Wood Furniture Finishing, Metal Sanding and Automotive Polishing, Dry or Wet Sanding, 9 x 3.6 Inch, 36-Sheet:
Bondo Spreader Pack:
Bondo All-Purpose Putty:
Zinsser 1-2-3 Primer:
Krylon Alternative: Rustoleum Tub and Tile White:
Caulking DAP Stretch:
Napco Extra Strong Acid Etch:
Jasco Paint and Epoxy Remover:
Loctite Foam Gap Filler:
Capspray Titan Compressor 75 / 95:
Titan 0524041 or 524041 Capspray Maxum II HVLP Spray Gun with Free Check Valve Kit 0297051:
3M Half Mask Reusable:
3M N95 Respirator Filter 10pk:
3M Cartridge Replacement Pack:
Fume Exhauster 8″ Duct Tubing:
Portable Ventilation Exhaust Fan here:
Tack Cloth:
Rustoleum Appliance Spray White:


About Author

Leave a Reply

Your email address will not be published. Required fields are marked *